HiC2065 - Voltage Repeater - Đại Lý Pepperl Fuchs

Nhà sản xuất: Pepperl Fuchs

Nhà cung cấp: Newskyvn

Model : HiC2065

Tên sản phẩm: Voltage Repeater

Liên hệ để được tư vấn hỗ trợ Mr.Thanh:

Email: quangthanh@newskyvn.com

Zalo: 0965.130.856

Đại lý Pepperl Fuchs Việt Nam



THÔNG SỐ KỸ THUẬT CỦA HiC2065

General specifications
Signal type Analog input
Supply
Connection SL1: 1a, 1b(-); 2a, 2b(+)
Rated voltage 20 ... 30 V DC bus powered via Termination Board
Ripple within the supply tolerance
Rated current ≤ 22 mA
Power dissipation/power consumption 0.7 W max.
Lockout voltage > 11 V DC
Input
Connection side field side
Connection SL2: 5a(+), 5b(-)
Input resistance ≥ 16 MΩ
Transmission range 0 ... ± 50 mV
Offset voltage/current ≤ 5 µV / ≤ 5 nA
Output
Connection side control side
Connection SL1: 8a(+), 7a(-)
Voltage 0 ... ± 50 mV
Load Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 kΩ
Output resistance max. 3 Ω
Line fault detection input: ± 100 mV
output: +200 mV, -115 mV
Fault indication output
Connection SL1: 6b
Output type open collector transistor (internal fault bus)
Fault voltage < Vcc/2 (when connected to Vcc via 10 kΩ pull up resistor)
Transfer characteristics
Deviation

After calibration at 20 °C (68 °F):
± 3 µV up to ± 10mV/± 0.05 % of the span up to +50 mV/± 0.05 % of the span up to -50 mV

Influence of ambient temperature ± 1 µV/K (typical ± 0.25 µV/K)
Absolute < 0.25 K at 30 V voltage supply
Bandwidth DC to > 350 Hz (-3 dB)
Settling time < 2 ms
Rise time/fall time ≤ 1 ms
Galvanic isolation
Output/power supply functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements LEDs
Control elements DIP-switch
Configuration via DIP switches
Labeling space for labeling at the front
Directive conformity
Electromagnetic compatibility

Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility NE 21:2006
For further information see system description.
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP20
Mass approx. 100 g
Dimensions 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch)
Mounting on Termination Board
Coding pin 2, 3 and 4 trimmed
For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate BASEEFA 10 ATEX 0031X

Marking Ex-Hexagon II (1)GD, I (M1), [Ex ia] IIC, [Ex iaD], [Ex ia] I (-20 °C ≤ Tamb ≤ 60 °C) [circuit(s) in zone 0/1/2]

Voltage 5.5 V DC

Current 2.4 mA

Power 3.3 mW
Supply

Maximum safe voltage 253 V (Attention! The rated voltage can be lower.)
Certificate BASEEFA 10 ATEX 0032X

Marking Ex-Hexagon II 3G Ex nA II T4
Galvanic isolation

Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity

Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval

Control drawing 116-0317 (cULus)
IECEx approval IECEx BAS 10.0012X
IECEx BAS 10.0013X

Approved for [Zone 0] [Ex ia] IIC, [Ex iaD], [Ex ia] I
Ex nA II T4
General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.


Classifications

System Classcode
ECLASS 11.0 27210120
ECLASS 10.0.1 27210120
ECLASS 9.0 27210120
ECLASS 8.0 27210120
ECLASS 5.1 27210120
ETIM 8.0 EC002653
ETIM 7.0 EC002653
ETIM 6.0 EC002653
ETIM 5.0 EC001485
UNSPSC 12.1 32101514